Les valeurs de charge recommandées (charges) et applications sont uniquement des valeurs indicatives. Elles peuvent être influencées négativement par le niveau de montage correct, la qualité du matériau dans lequel la fixation doit être réalisée, les conditions d'installation et environnementales et peuvent entraîner des risques pour les personnes et des dommages matériels. En cas de doute, laissez un spécialiste procéder à la fixation.

Screw size and load

 

The holding values (loads) were determined by fischer under optimum conditions, such as drill hole preparation and cleaning, correct installation and the best possible screws in intact and load-bearing building materials and under normal environmental conditions.


If plugs are supplied without screws, the loads apply for the recommended screws with the maximum diameter. Screws with smaller diameters mean lower loads.



If plugs are supplied without screws, the loads apply for the recommended screws with the maximum diameter. Screws with smaller diameters mean lower loads.




Building materials and loads

The building material plugs are fixed into is decisive for the load that can be borne by the plug. The building material symbols show which building material groups the plug can be used for. The respective loads are maximum recommended loads in the respective base material.
If several building materials are shown in combination, the load is specified for the weakest building material.


Cracked concrete

Non-cracked concrete

Solid brick

Perforated brick

Solid sand-lime brick

Perforated sand-lime brick

Gypsum plasterboard

Gypsum fibreboard

Wooden boards

Wood

Insulation material

Fastening points and loads


Tensile load

The load specified on the packaging only applies for one fastening point (single plug) and represents the lower value of tensile and transverse load.
 
Example:
Tensile load 15 kg (150 N)
Transverse load 25 kg (250 N)
–––––––––––––––––––––––––––
Load specification on packaging 15 kg (150 N)

Tensile load

Transverse load

If the application involves groups of plugs (groups of 2, 4 etc.), the load-bearing capacity of the products must be considered differently. In cause of doubt, we recommend consulting a specialist (see below for support services).

Transverse load

Further information

QR Code
Access to all product information available online is provided by the respective QR code on the packaging.
Retailer
The professional retailer through whom you purchased your fischer product will be happy to provide you with advice and support.
Technical hotline
If you have any questions or problems, you can contact the fischer Application Technology Technical Hotline at any time.. Contact the technical hotline
FiXperience
FiXperience, the free design software for professionals and documents such as approvals, catalogues, brochures and much more useful information can be downloaded from our Service section.
Apps
The apps fischer Professional and fischer Dübelfinder for DIYers are available free of charge in the App Store and under Google Play.
Social Media
Visit the various fischer social media channels for comprehensive plug know-how and to watch and listen to a variety of tips and tricks.
cd-green-64c8fdbcdb-6hnp2